Furuno RP180 User Manual
Page 53
8. MEMORY CARD OPERATIONS
8-4
6. Assign a file name as below. A file name may contain 32 alphanumeric characters. For
example, assign the file name FURUNO1.
(a) Choose the character “F” with the trackball.
(b) Press the [ENTER/SELECT] key. (You can change a wrong character by choosing it with the
trackball and the entering correct character. You may cancel an entire line of data with the
[CANCEL/CLEAR] key.)
(c) Choose the character “U” with the trackball and press the [ENTER/SELECT] key.
(d) Enter the remaining characters.
(e) Choose OK.
7. Press the [ENTER/SELECT] key. “Recording” appears while data is being recorded.
8. Press the [MENU] key to finish.
Write protect tab
The write protect tab on a memory card prevents writing over information stored on the card.
Slide the tab rightward to write protect a memory card.
Slide tab right to
write protect.
Write protect tab on memory card
- MARINE RADAR 1953C (100 pages)
- GP-1650D (2 pages)
- GP-1650WD (96 pages)
- GP-1650W (96 pages)
- NAVNET 1943C-BB (92 pages)
- GD-3300 (137 pages)
- DUAL GPS GP-150-DUAL (130 pages)
- GP-1650WF (113 pages)
- CH-300 (124 pages)
- NX-300 (65 pages)
- NX-300 (2 pages)
- GP-1850WDF (115 pages)
- GP-3500 (192 pages)
- GP-1850WD (44 pages)
- GP-1850W (98 pages)
- GP-1850WD (98 pages)
- GP-1850W (4 pages)
- GP-1850W (98 pages)
- INTERFACE UNIT IF-2500 (12 pages)
- GP-31 (2 pages)
- GP-33 (98 pages)
- GP-7000 (28 pages)
- GP-7000 (2 pages)
- GP37 (2 pages)
- GP-90 (36 pages)
- CI-35 (69 pages)
- GP-1850DF (63 pages)
- GP-1850F (110 pages)
- GP-30 (2 pages)
- FCV-30 (110 pages)
- BACK GP-80 (103 pages)
- LC-90 MARK-II (2 pages)
- GP-1650W (44 pages)
- DD-80 (119 pages)
- RP-250 (73 pages)
- GP-1650 (94 pages)
- GP-185F (4 pages)
- GP-1600F (97 pages)
- GP-1850D (94 pages)
- GP-7000F (132 pages)
- GP-7000F (52 pages)
- GP-36 (81 pages)
- GP-150-DUAL (123 pages)
- GP-80 (37 pages)
- 1650WDF (4 pages)