Using your oven for the fi rst time – Fisher & Paykel OR60 User Manual
Page 60
58
FOUR FUNC
TION MODELS
MODELS
WITH CER
AMIC GLASS C
OOK
T
O
P
Fig. 66 Control panel
1
Control buttons
2
Clock display
3
Oven temperature knob
4
Oven temperature indicator light
5
Oven function knob
Before using your new oven, please:
1
Read this user guide, taking special note of the ‘Safety and warnings’ section.
2
Remove all accessories and packaging. Peel the protective film off all surfaces and
accessories.
3
Set the clock. The oven will not work until the clock has been set.
4
Condition the oven:
Put in the shelves and trays. Fit them between
the metal runners, with the safety stop notch
down and at the back. (If the side racks and
catalytic panels are not already fitted, see ‘Care
and cleaning’ for how to do this.)
Heat the oven on maximum for:
60 minutes in the
position
30 minutes in the
position
15 minutes in the
position
There will be a distincitve smell while you are
conditioning your oven. This is normal, but make
sure your kitchen is well ventilated during the
conditioning.
5
Once cooled, wipe out the oven with a damp cloth and mild detergent,
and dry thoroughly.
Fig. 67 Correct position of shelves and grill tray
1
3
5
6
7
8
9
2
4
6
Front left element
7
Rear left dual oval element
8
Rear right element
9
Front right dual element
10
Cooktop ‘Element on’ indicator light
11
Cooktop element ‘Hot surface’ indicator light
10
11
Using your oven for the fi rst time