Using your oven for the fi rst time – Fisher & Paykel OR60 User Manual
Page 36
34
Using your oven for the fi rst time
FOUR FUNC
TION MODELS
SE
VEN-FUNC
TION MODELS
WITH GAS C
OOK
T
O
P
Fig. 39 Control panel
1
Control buttons
2
Clock display
3
Temperature knob
4
Temperature indicator light
5
Function knob
Before using your new oven, please:
1
Read this user guide, taking special note of the ‘Safety and warnings’ section.
2
Remove all accessories and packaging. Peel the protective film off all surfaces and
accessories.
3
Set the clock. The oven will not work until the clock has been set.
4
Condition the oven:
Put in the shelves and trays. Fit them between the metal runners, with the safety stop
notch down and at the back. (If the side racks and catalytic panels are not already
fitted, see ‘Care and cleaning’ for how to do this.)
Heat the oven on maximum for:
60 minutes in the
position
30 minutes in the
position
15 minutes in the
position
There will be a distincitve smell while you are
conditioning your oven. This is normal, but make
sure your kitchen is well ventilated during the
conditioning.
5
Once cooled, wipe out the oven with a damp cloth
and mild detergent, and dry thoroughly.
Fig. 40 Correct position of shelves and grill tray
1
3
5
6
7
8
9
2
4
6
Front left (auxiliary) burner knob
7
Rear left (semi-rapid) burner knob
8
Rear right (semi-rapid) burner knob
9
Front right (triple ring wok) burner knob