beautypg.com

2 installation on a mac os 9.2, Pre-installation checklist – FujiFilm FinePix A340 User Manual

Page 56

background image

55

Software

Installation

5

5.2 INSTALLATION ON A Mac OS 9.2

Pre-installation checklist

To run this software, you must have the hardware and software described below. Check your
system before you begin the installation.

Compatible Mac

Power Macintosh G3

✽1

, PowerBook G3

✽1

,

Power Macintosh G4, iMac, iBook,
Power Macintosh G4 Cube or PowerBook G4

Operating System

RAM

64 MB minimum

✽3

, 256 MB or more recommended

(When using ImageMixer VCD2 for FinePix: 128 MB or better)

Hard disk space

Amount required for installation: 400 MB minimum
Amount required for operation: 600 MB minimum
(When using ImageMixer VCD2 for FinePix: 2 GB or better)

Display

800

× 600 pixels or better, at least 32,000 colors

(When using ImageMixer VCD2 for FinePix: 1024

× 768 or better)

Internet connection

4

i To use the FinePix Internet Service or mail attachment function

An Internet connection and e-mail transmission software

i Connection speed: 56 k or better recommended

Mac OS 9.2.2

✽2

✽1 Models with a USB port as a standard feature

✽2 This software does not run correctly in the Mac OS X Classic environment.

✽3 Turn virtual memory on if necessary.

✽4 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet

connection.

1

Turn on your Macintosh and start up Mac OS 9.2.2.

!

Do not connect the camera to your Macintosh until the software installation is completed.

3

When the bundled CD-ROM is loaded into the CD-ROM drive, the [FinePix] volume appears.
Double-click the volume icon to open the volume window.

!

If the “FinePix” window does not open automatically, double-click the CD-ROM icon.

Double-click “Installer for MacOS9” to launch the Installer.

2

Notes

i Connect the camera directly to the Macintosh using the USB cable (included). The software may not

operate correctly if you use an extension cable or connect the camera via a USB hub.

i Push the USB connector fully into the socket to ensure that it is securely connected. The software

may not operate correctly if the connection is faulty.

i Additional USB interface board is not guaranteed.
i On Macintosh computers, allocate at least 400 MB of virtual memory when RAW FILE CONVERTER

LE is used. If other applications will be used at the same time, allocate the additional amount required
for those applications also.

Continued