FujiFilm FinePix A340 - Manual (Page 53)

FRAME NO.
CONT. : Pictures are stored beginning from the
highest file number stored on the last xD-
Picture Card used.
RENEW: Pictures are stored on each xD-Picture
Card beginning with a file number “0001”.
Setting this function to “CONT.” makes file
management easier as it ensures that file names
are not duplicated when images are downloaded to
a PC.
● !
When the camera settings are “ q RESET”, the frame number
setting (“CONT.” or “RENEW”) is changed to “CONT.” and
the frame number itself does not return to “0001”.
●
!
When the xD-Picture Card already contains image files with
file numbers higher than the highest file number on the last
xD-Picture Card, images are stored beginning from the
highest file number on the current xD-Picture Card.
Check the file number by viewing the image. The
last 4 digits of the 7-digit number in the top right
corner of the LCD monitor are the file numbers,
while the first 3 digits show the directory number.
● !
When changing the xD-Picture Card, always turn the
camera off before opening the battery cover. Opening the
battery cover without turning the camera off may cause the
frame number memory to not function.
● !
File number runs from 0001 to 9999. Once 9999 is exceeded,
the directory number changes from 100 to 101. The
maximum number is 999–9999.
●
! The displayed frame number may differ for images
photographed on other cameras.
● !
If “ æ ” appears, see P.78.
File number
Directory number
Frame number
A A
B B
CONT. RENEW
Formatted xD-Picture Card used for
both A and B.
52
SET-UP
Always press the “MENU/OK” button to complete
the settings.
When the photography mode is selected with world
time set, “
£ ” appears on the LCD monitor for 3
seconds.
4
5