FieldServer FS-8700-72 - Manual (Page 12)

FS-8700-72 Secutron Manual Page 12 of 16
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: [email protected]
6.3.3 Map Descriptor Example.
Map_Descriptor_Name , Scan_Interval , Data_Array_Name , Data_Array_Offset , Function , Node_Name , Secutron_Type , Secutron_Circuit , Length
P1C1_DEVICES , - , P1C1_DEVICES , 0 , Passive , Node_1 , Device , 1 , 200
P1C1_FUNCTION , - , P1C1_FUNCTION , 0 , Passive , Node_1 , Function , 1 , 200
P1C69_RESTART , - , P1C69_RESTART , 0 , Passive , Node_1 , Device , 69 , 100
P1C69_FUNCTION , - , P1C69_FUNCTION , 0 , Passive , Node_1 , Function , 69 , 100
P1C90_RESET , - , P1C90_RESET , 0 , Passive , Node_1 , Device , 90 , 100
P1C90_FUNCTION , - , P1C90_FUNCTION , 0 , Passive , Node_1 , Function , 90 , 100
Any unique
name. Name
will appear in
Bridge Map
Descriptor
status
information
screens.
The rate a t which the
driver polls the panel.
A Data Array name
must be one found
under Data_Arrays.
Data from a circuit
event will be stored in
the array at
Data_Array_Offset.
Function may not be
read or write since
it implements a
Server. Function
may only be Passive.
A name given
to the device to
which the
FieldServer is
connected.
The type of data the
Map Descriptor
points to. Device
data contains alarm
statuses. Function
data contains
condition codes.
Refer to Appendix
B.1 for more
information.
The circuit or
zone number
used to trap
incoming events
into the Map
Descriptor. See
Driver notes.
The number of devices
on the circuit this Map
Descriptor can detect
for incoming events.