FUJITSU C150-E146-02EN - Manual (Page 81)

7-9
3 At Screen A, if you want to let the offset
return to default, select “Yes” otherwise
“No” then press
. The scanner
displays Screen B.
4 At Screen B, press to increase the
offset or press to decrease offset.
The increment or decrement is 0.5 mm.
Then press
to activate the setting.
The scanner displays Screen C.
5 At Screen C, press to increase the
offset or press to decrease offset.
Then press to activate the setting.
The scanner displays the next item of the
setup mode.