FUJITSU C150-E146-02EN - Manual (Page 69)

6-6
10 Select Back Density (when “Duplex” was
Selected) by pressing or . As the
cursor moves to right, /
may appear. Then press
. Scanner
displays Screen 8.
11 Select Front Halftone by pressing or
.
Parameter Description
No Halftone is OFF. Therefore binary reading is specified.
H1 Halftone with dither is specified.
H2 Halftone with error diffusion is specified.
L1 * Automatic separation with dither is specified.
L2 * Automatic separation with error diffusion is specified.
* This parameter appears only when the IPC-4D is installed.
Press to admit. Scanner displays
Screen 9.
12 Select Back Halftone (when “Duplex” was
specified) by pressing or . The
parameters are same as 11. Press
to admit. Then scanner displays Screen
10.
13 Select Front Document Type by pressing
or .