FUJITSU C150-E146-02EN - Manual (Page 80)

7-8
6. Setting time-out limit
1 Press “Next” or “Previous” and let
the scanner display the Screen 46.
2 At the Screen 46, press to increase
the number or press to decrease the
time-out limit. Then press to
activate the setting.
NOTE
Default is 30 second.
3 Press to return.
7. ADF Front Offset Setting
8. ADF Back Offset Setting
9. Flatbed Offset Setting
1 Press “Next” or “Previous” and let
the scanner display as follows;
• Front Offset by ADF : Screen 47.
• Back Offset by ADF : Screen 48.
• Offset of Flatbed
: Screen 49.
2 Select “Yes” by pressing or button,
and press . Then scanner displays
Screen A.