beautypg.com

Installation and piping, 1 installation, Caution – Fujimoto Fuji Differential Pressure Transmitter FKK 4 User Manual

Page 48: Danger, Bracket mounting mounting

background image

42

6.1 Installation

After unpacking, check the delivered items.
This transmitter can be mounted on a pipe or on a wall.
Note that the bolts (M8) for wall mounting should be supplied by the customer.

6

Mount the bracket to the transmitter.
The bracket should be mounted to the process cover as shown below.

(Differential pressure transmitter,
type FKK)

(1) Fasten the transmitter to a vertical or horizontal pipe using the supplied U-bolt (tightening torque

approximately 15 N•m (1.5 kgf•m) <11ft-lb>).

(2) Use a pipe of outer diameter ø60.5 <2.38">mm.

Wall mounting

(1) Fasten to wall face by M8 bolt utilizing the U-bolt holes.

Pipe mounting

Measuring chamber
detector cover

Bracket

Plain washer

Spring washer

Mounting bolt
(M8 × 12)

Transmitter

Bracket

Plain washer

Spring washer

Mounting bolt
(M4 × 10)

Transmitter

Adaptor (Option)

Bracket

Plain washer

Spring washer

Mounting bolt
(M4 × 10)

Transmitter

Adaptor (Option)

Mount to a horizontal pipe

Mount to a vertical pipe

(Pressure and absolute transmitter, types : FKP & FKH)

U-bolt

Mount to a horizontal pipe

Mount to a vertical pipe

Important

If the transmitter is not used soon after delivery, then leave it packed and store it in a
room at the normal temperature and humidity (25

°C <77°F>, 60%RH).

CAUTION

• The transmitter is heavy. Be careful when handling it.
• The transmitter should be installed in a place that meets the operating conditions

shown in DS sheet or instruction manual.

• Install the transmitter according to the instruction manual. Improper installation

may lead to the cause of fall, trouble or incorrect operation.

• When installing, make sure that the transmitter interior is free from cable chips

and other foreign objects to prevent fire, trouble or incorrect operation.

DANGER

• Non-explosion-proof transmitter must not be used in a place with explosive gas to

prevent serious accidents such as explosion, fire, etc.

Bracket mounting

Mounting

INSTALLATION AND PIPING

(Differential pressure transmitter)

(Pressure and absolute pressure transmitters transmitter)