FUJITSU C141-E185-01EN MAS3184NC/NP - Manual (Page 63)

C141-E185 4-13
4.3.2 68 pin connector type 16-bit SCSI model (NP model)
(1) Connectors
Figures 4.15 show the locations of connectors and terminals on the 68 pin connector type 16-bit
SCSI model (NP model).
•
Power supply connector
•
SCSI connector
•
External operator panel connector
External operator panel
connector (CN2)
SCSI connector
(CN1)
Power supply
connector
(CN1)
External operator
panel connector
(CN1)
Figure 4.15 NP connectors and terminals location
(2) SCSI connector and power supply connector
a. 16-bit SCSI
The connector for the SCSI bus is an unshielded P connector conforming to SCSI-3 type which
has two 34-pin rows spaced 1.27 mm (0.05 inch) apart. Figure 4.16 shows the SCSI
connector. See Section B.2 in Appendix B for the signal assignments on the SCSI connector.
For details on the physical/electrical requirements of the interface signals, refer to Sections 1.3
and 1.4 in the SCSI Physical Interface Specifications.