beautypg.com

High safety, Laser safety, High safety laser safety – FUJITSU XG2000 User Manual

Page 9

background image

For Safe Use of the XG2000

7

[Use for the high safety required case]

The XG2000 is designed, developed and manufactured as contemplated for general use,
including without limitation, general office use, personal use, household use, and ordinary
industrial use, but is not designed, developed and manufactured for use in situations with
accompanying fatal risks or dangers that, unless extremely high safety is secured, could lead
directly to death, personal injury, severe physical damage or other loss (hereinafter "High
Safety Required Use"), including without limitation, nuclear reaction control in nuclear facility,
aircraft flight control, air traffic control, mass transport control, medical life support system,
and missile launch control in weapon systems.
Do not use the XG2000 for High Safety Required Use without otherwise ensuring the safety
level required. Fujitsu and its related companies assume no liability whatsoever for damages
arising from use of the XG2000 by the user in high-safety applications, and for any claims or
compensation for damages by the user or a third party.

The XG2000 can install a class 1 laser module (XFP module), and can emit invisible laser
light. Do not look into the 10 Gigabit Ethernet port openings. The following warning applies to
the XG2000’s laser:

• The XG2000 can install XFP modules, which are laser devices.

In the USA, these XFP modules are certified as Class 1 laser products that conform to the
requirements of the Department of Health and Human Services (DHHS) regulation 21 CFR
Subchapter J, and this certification is indicated by a label attached to each XFP module.
Outside the USA, these XFP modules are certified as Class 1 laser products that conform
to the requirements given in IEC825-1 (1993) and Amendment11 (1996) of EN60825-1
(1994).

• Even when cables are not connected, invisible laser light may be still emitted from the

port openings. To avoid this laser light, never peer into the port openings.

* XFP module which install in XG2000 must be selected from our specified. (refer to the

specified module list)

High safety

Laser safety