FUJITSU XG2000 - Manual (Page 33)

Installation of XFP modules 31
2
The following explains how to install the XFP modules in the XG2000.
1.
Install the XPF module in the XG2000.
How to install the XFP module is the following,
(1) Insert the XFP module with the cable connector facings outward. In cases installing the
XFP module in an odd port number, the slot connector facings down. Otherwise, in cases
installing the XFP module in an even port number, the slot connector facings up.
(2) Slide the XFP module into the slot until it snaps into place without the lever lifting.
2-3
Installation of XFP modules
This section describes the installation of the XFP modules.
2-3-1 Installing the XFP modules
Label