FUJITSU XG2000 - Manual (Page 16)

14 Installation
• XG2000 The XG2000 itself.
• CD-ROM Contains documents necessary to operate the XG2000.
• Power Cord A 3-pin cable to connect the XG2000 to a power supply.
• Serial Cross Cable A cable to connect the XG2000 to a PC when the settings need
to be adjusted.
• Hardware Guide A manual describing the XG2000 hardware and related mat-
ters (this manual).
1-1
Parts List
Before proceeding, check that all of the following parts were included in your XG2000 package.
Contact the vendor's service department if any parts are missing and/or the manual has any miss-
ing or wrongly collated pages.
Keep the hardware guide (this manual) and the CD-ROM in a safe place.
CD-ROM
Power code × 2
Rack Mounting Bracket B × 2
Rail R Rail L
Rack Mounting Brackets × 2
Cage Nuts
× 8
Rack Nuts
× 8
Rack Screws (Large)
× 8
Serial Cross Cable
Rack Screws (Small)
× 14
Hardware Guide
(this manual)
XG2000