Furuno GP-1650WD - Manual (Page 34)

5. WAYPOINTS
5-2
2. Press the WAYPOINTS soft key to
display the WAYPOINTS menu.
WPT
DGPS 3D
LOCAL LIST
WAYPOINT BY CURSOR
ALPHA/NUMERIC LIST
WAYPOINT BY RANGE & BEARING
RETURN
ADD/EDIT/MOVE WAYPOINTS
Waypoints menu
3. Press the WAYPOINT BY CURSOR soft
key. The plotter display appears.
4. Operate the cursor pad to place the
cursor on the location desired.
5. Press the NEW WPT soft key. The
waypoint window appears and it shows
mark shape, waypoint name, comment
(default: date), position of waypoint and
proximity alarm radius.
DGPS 3D
NEW
WPT MARK
COMMENT
NAME
RETURN
LAT
LON
PROXIMITY
ALARM RADIUS
0 0 1 WPT
17:38 02JUN02
34 12. 345' N
135 12. 3457' W
0.00 nm
SELECT
MARK
COORD
TYPE
N<-->S
E<-->W
SAVE
Waypoint window
6. If you do not need to change the
waypoint data, simply press the SAVE
soft key to register the waypoint and
return to the plotter display. If you want to
change waypoint data as shown in the
next several paragraphs, be sure to
press the SAVE soft key only after
changing all data you want to change.
Changing the shape and color of waypoint
mark
1. Press the SELECT MARK soft key.
2. Press the MARK SHAPE soft key to open
the mark shape selection window.
MARK SHAPE
Mark shape selection window
3. Operate the cursor pad to select shape
desired.
4. Press the ENTER soft key or the
[ENTER] key.
5. Press the SELECT MARK soft key.
6. Press the MARK COLOR soft key to
open the mark color selection window.
SELECT COLOR
▲
RED
YELLOW
GREEN
LIGHT BLUE
PURPLE
BLUE
WHITE
▼
Mark color selection window
7. Press ▲ or ▼ to select the color desired,
and then press the ENTER soft key or
the [ENTER] key.