Fisher-Price H4433 - Manual (Page 11)

H4433pr-0920
11
ASSEMBLY F
H4433pr-0920
13
• Position the steering wheel cover so the fastener tabs are towards
the bottom of the steering wheel.
• Fit the steering wheel cover over the steering wheel.
• Press the fastener tabs together, around either side of the bottom
spoke of the steering wheel.
Steering
Wheel
Cover
Side View
Steering
Wheel
Bottom
Spoke
Tab Tab
Tabs
Lens
Wide
Notch
Lens Guard Wide Tab
• Fit the wide notch in the side of a headlight lens under the wide tab
on a lens guard.
• Press firmly on the inside of the headlight lens to snap it into the
lens guard.
• Repeat this procedure to assemble the other headlight lens to the
remaining lens guard.
14
11
• Turn the vehicle on its side.
• Insert the end of the steering column through the hole in the
steering rod.
• Place the 3 /
8
" washer on the end of the steering column.
End of
Steering
Column
Steering
Rod Hole
3 /
8
" Washer
Bottom View
12
• Insert a #8 x 5 /
8
" screw through the hole in the end of the
steering column.
• Fit a #8 lock nut (rounded side out) on the end of the screw
and tighten.
• While holding the lock nut with an adjustable wrench (or pliers),
tighten the screw.
• Turn the vehicle upright.
End of
Steering
Column
#8 Lock Nut
#8 x 5 /
8
" Screw
12 12