FMI FLAME-MAX FVFM27NR - Manual (Page 2)

www.fmiproducts.com 121353-01H 2
SAFETY
WARNING: Improper
installation, adjustment,
alteration, service or
maintenance can cause
injury or property dam-
age. Refer to this manual
for correct installation
and operational proce-
dures. For assistance or
additional information
consult a qualified in-
staller, service agency or
the gas supplier.
WARNING: This ap-
pliance is for installation
only in a solid-fuel burning
masonry or UL127 fac-
tory-built fireplace, or in a
listed ventless firebox en-
closure. It is design certi-
fied for these installations
in accordance with ANSI
Z21.11.2. Exception: Do
not install this appliance
in a factory-built fireplace
that includes instructions
stating it has not been test-
ed or should not be used
with unvented gas logs.
This appliance may be in-
stalled in an aftermarket,*
permanently located,
manufactured (mobile)
home, where not prohib-
ited by local codes.
This appliance is only for
use with the type of gas
indicated on the rating
plate. This appliance is
not convertible for use
with other gases.
* Aftermarket: Completion of sale, not for
purpose of resale, from the manufacturer
WARNING: This product
contains and/or generates
chemicals known to the State
of California to cause cancer or
birth defects, or other reproduc-
tive harm.
IMPORTANT: Read this owner’s
manual carefully and completely
before trying to assemble, op-
erate, or service this heater.
Improper use of this heater can
cause serious injury or death
from burns, fire, explosion,
electrical shock, and carbon
monoxide poisoning.
TAbLE OF CONTENTS
Safety .................................................................. 2
Product Identification ........................................... 5
Local Codes......................................................... 5
Unpacking............................................................ 5
Product Features ................................................. 5
Remote Control Accessories ............................... 6
Air for Combustion and Ventilation ...................... 6
Installation ........................................................... 8
Operation ........................................................... 18
Inspecting Burners............................................. 22 Cleaning and Maintenance ................................ 23
Wiring Diagram .................................................. 24
Troubleshooting ................................................. 24
Specifications .................................................... 28
Replacement Parts ............................................ 28
Service Hints ..................................................... 28
Technical Services ............................................. 28
Accessories ....................................................... 29
Parts .................................................................. 30
Warranty ..............................................Back Cover