FUJITSU Image Scanner fi-4120C - Manual (Page 59)

3.2 Cleaning the ADF
fi-4120C Image Scanner Operator’s Guide 43
DAIL
Y CARE
3
3.2 Cleaning the ADF
As a Guideline, clean the ADF every 1,000 scanned sheets. Note that this guideline varies accord-
ing to the type of documents you scan. For example, it may be necessary to clean the ADF more
frequently if documents are scanned when the toner is not sufficiently fixed on the printout.
CAUTION
• The glass surface inside the ADF becomes hot during the operation of the scanner.
Before you start to clean the inner parts of the scanner, disconnect the AC adapter from the
power outlet, and wait at least 15 minutes to let the glass cool down.
• When you perform cleaning, make sure that the inside of the scanner is free of any foreign
object, and be careful not to get your hand or the cloth caught on the pick spring (metal
part) as a deformed pick spring (metal part) may cause injury.
■ Cleaning the ADF
1. Open the ADF by pushing on the ADF button and turning the ADF cover to the front.
CAUTION
Be careful, the ADF cover may close and pinch your finger.
ADF button
The front portion