Fujitsu Siemens Computers RX600 S3 - Manual (Page 13)

System configurator and order-information guide
G PRIMERGY RX600 S3 Status 2007-01-24
Section VIII optional SCSI / RAID controller
B. SCSI - controller for internal and external devices.
S26361-F2399-E1
1-channel SCSI U160 Controller
Adaptec 29160
plug:
internal: HD 50-pin & HD68
max. 2x external: HD68
without cable
64/66 PCI
3.3V and 5V tolerant signaling
max. 2x per system The RAID controller can be used only for
the connection of external subsystems (SX30)
Cables for the connection from the RAID Controllers
to the subsystem see configurator SX30.
C. RAID-Controller for external Disk Arrays
S26361-F3006-E128
2-channel RAID Controller U320
LSI
320-2
128MB SDRAM ECC Cache
max. 2x default with TBBU
plug: internal 2x HD68;
external: 2x VHDCI
without cable
64/66 PCI controller, 180mm
3.3V and 5V tolerant signaling
max. 2x per system
SAS RAID controller for JBOD subsystems
S26361-F3215-E1
8 port SAS RAID Controller
LSI
MegaRAID SAS 8344 ELP
256MB Cache with ECC
optional BBU
SAS 3Gb/sec
4 internal / 4 port external
PCIe x4, 198mm It is only a maximum cable
full height bracket length of 2m supported
max. 1x per system
S26361-F3215-E10
Cache Battery Backup Unit Controller plus optional BBU
max. 1x per Controller require a full hight PCI slot.
H
Fujitsu Siemens Computers Enterprise Products PRIMERGY Server 13 of 17