FieldServer FS-8700-103 - Manual (Page 4)

FS-8700-103_ATMI_TGM_Serial Manual Page 4 of 28
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel : (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]
2. Driver Scope of Supply
2.1. Supplied by FieldServer Technologies for this driver
FieldServer Technologies
PART #
Description
FS-8917-12
Connector, 9-pin female: connects to DTE, DSR/DTR
loop
FS-8700-103 Driver Manual.
2.2. Provided by the Supplier of 3
rd
Party Equipment
2.2.1. Required 3
rd
Party Hardware
Part # Description
No specific Hardware requirements other than TGM unit.
2.2.2. Required 3
rd
Party Configuration
The FieldServer’s serial port must be configured to be used as a ‘Console Port’ on the
TGM device. The ‘Console Port’ is configurable. At least one of the two serial ports on
the TGM device must be configured to enable the ‘Console Port’. This is not always the
case when the TGM is shipped. Notes in Appendix D provide additional information.