FUJITSU C150-E140-03EN - Manual (Page 44)

3-8 M3091DC Image Scanner Operation Guide
7) Press the scan button on the main unit.
u Key point
Press the scan button to start the application software. The
mark is displayed until the application starts.
If the application software does not start and the Function No.
display panel displays the Function No. again, the scan
processing is canceled.
8) After finishing reading, remove the documents from the stacker.
u Note
When validating the Duplex button and Scan button on the equipment
using the TWAIN driver, you must validate "Follow Instructions on
the Operator Panel of the Equipment" on the Fujitsu M3091DC
TWAIN32 operation environment setting screen.
u Key point
−
You can perform a simple editing operation of the data of a
scanned document by using M Image application.
−
You can also save the data in an image format such as TIFF.