FUJITSU C150-E140-03EN User Manual

Page 22

1-4

M3091DC Image Scanner Operation Guide

Component Name

Function

Copy density
dial

Adjusts copy density (dark/light) in five stages.

Function No.
display panel

Displays the Function No. or also displays the scanner
read mode as follows;

On: Single-side reading mode

Blink: Double-sided reading mode

Mark: An application is being activated

When the AC adapter is connected to the scanner or the
PC’s power is turned on, the initialization of scanner is
executed. The display on the panel changes as follows;

→

1 (When 1 appears, scanner becomes ready)

Function button

Selects a function to be started using this button.

This button’s function is set using Launch.

Duplex button

Switches between read modes. You can confirm the
current read mode with the Function No. display panel.

Send to button

Copies documents loaded in the document support.

Starts the operation specified by the Function button.

Scan button

Scans the document placed in position.

Operator
panel

Power lamp

Stays lit while power is being supplied.

Stacker

Stacks the scanned documents.

Note:

Pressing the Send to or Scan button initiates the application software. The

mark is displayed until the application software is ready. If the

application software fails to get ready and the function No. display is
restored, the Send to or Scan processing is canceled.