Furuno GP-1650 - Manual (Page 11)

1-3
1.4 Adjusting Tone and
Brilliance
1. Press the [POWER/BRILL] key with a
touch-and-release action. The tone and
brilliance setting menu appears.
TONE
BRILL
TONE
TONE
BRILL
BRILL
RETURN
Tone and display brilliance setting menu
Functions
Soft keys
Figure 1-4 Tone and
brilliance adjustment screen
2. Press t or s to adjust display tone.
3. Press ▲ or ▼ to adjust display brilliance.
Note that tone and brilliance can also be ad-
justed by soft keys. After pressing the
[POWER/BRILL] key, use the appropriate soft
key to adjust tone or brilliance.
Note: Tone or brilliance must be adjusted
within 10 seconds after pressing the
[POWER/BRILL] key or the tone and bril-
liance adjustment screen will be erased.
1.5 Plotter Displays
There are four types of plotter displays: Plot-
ter display, Navigation data display, Steering
display and Highway display. For details, re-
fer to Chapter 3.
Selecting a display
Press the [PLOT] key. Each time this key is
pressed, the display mode changes in the se-
quence shown below.
[Plotter Display]
DGPS 3D
NAV
POS
COURSE
UP
ZOOM
OUT
ZOOM
IN
NORTH
UP
BRIDGE
FISH WP-002
[Nav Data Display]
[Steering Display]
DGPS 3D
EDIT
XT-LMT
X T E 0 0 0 . 0 2 n m
0.1NM 0.1NM
BRG 2 4 5 . 0
°
CSE
TTG
RNG
SPD n m
k t
ETA 1h 59m 29th 14:50
2 3 4 . 5
°
2 7 . 2
1 3 . 6
260 250 240 230
CROSS
TRACK
Q P < 0 1 >
[Highway Display]
DGPS 3D
EDIT
XT-LMT
X T E 0 0 0 . 0 2 n m
0.1NM 0.1NM
HIGHWAY
001WPT
CSE
BRG
RNG
SPD
87.8 °
9 4 . 6 °
1 . 8 8 n m
001WPT
YUUKI
FISH01
1 0 . 0 k t
DGPS 3D
BEACON
INFO
SAT
INFO
ZOOM
TD
LAT/LON DATE: OCT 21 1998 TIME 23:59:59
POSITION
34
°
56.789’ N
135
°
56.789’ E
RNG
NM
27.2
BRG
245.0
°
SPD
KT
16.3
CSE
245.8
°
DATUM: WGS-84
LAT
LON
TMP 65.8 ° F DEP 20ft
Figure 1-5 Display modes (plotter)