Freecom Technologies Dual Drive Network Center - Manual (Page 52)

52
FREECOM DUAL DRIVE NETWORK CENTER
Adding and removing mapped network shares
You can assign a drive letter to shared folders on your Dual Drive Network Center. This
allows you to access files in Windows more quickly.
Start recovery procedure
This procedure can reset and repair a Dual Drive Network Center to factory default settings
if you cannot access your Dual Drive Network Center anymore.
To restore your settings, please proceed as follows:
a) Enable the Recovery mode by clicking 'Start the recovery procedure' in the Freecom
Network Storage Assistant.
b) Turn the Dual Drive Network Center off.
c) Use a pointed object to carefully press the 'Reset' button. It is located next to the AC
power slot on the back of the Dual Drive Network Center.
d) Keep the 'Reset' button pressed down and turn device on again.
e) Wait until white LED goes off (ca. 1 second), the release the 'Reset' button.
EN