User maintenance instruction, Cleaning the dishdrawer – Fisher & Paykel DS602 User Manual

Page 26

USER MAINTENANCE INSTRUCTION

Cleaning the Drain Filter, Spray Arm,

Filter Plate and Motor Assembly

We recommend the drain filter be cleaned whenever

there is evidence of food particles.

The filter plate is designed to be self cleaning, but

food scraps may accumulate.

The spray arm and filter plate may need cleaning

about once a month in normal use or more often,

should the need arise.

To Clean the Drain Filter

Lift up the drain filter access panel, if fitted on the

basket.

Lift and remove the drain filter out of the

DishDrawer.

Empty, rinse under clean running water and

replace back into the allocated space. The correct

placement of the drain filter is shown in

Figure 21.

To Clean the Spray Arm

Remove the basket carefully. Lift from the back

end first so that you do not knock the detergent

and rinse agent dispenser.

Lift the spray arm.

Shake any foreign material out of the spray arm.

Rinse the spray arm under water and wipe the

spray arm with a damp cloth.

Replace the spray arm back onto the impeller.

Figure 21 shows the correct placement of the

spray arm.

Figure 21 - Internal Parts

of the DishDrawer

Key

1. Spray Arm

2. Filter Plate

3. Drain Filter

Cleaning the DishDrawer

The secondary panel and the front of the DishDrawer may need wiping down from

time to time. This can be done with a clean damp cloth.

We do not recommend the use of the following cleaning agents on or in your

DishDrawer as they may damage it:

Plastic or stainless steel scouring pads.

Abrasive, solvent, household cleaners, acid or alkaline cleaners.

Handwashing liquids, soap, laundry detergents or disinfectants.

If a dishwasher cleaner is used, we would strongly recommend a Heavy Plus wash

program with detergent by run immediately afterward to prevent damaged to the

DishDrawer.