FujiFilm 2400 - Manual (Page 25)

49
4
48
3 2
A confirmation screen appears.
If you are erasing all the frames or formatting the
card, press the “MENU/OK” button to proceed.
If you are erasing one frame, use the “
d ” and
“ c ” buttons to select the frame and then press
the “MENU/OK” button.
➀
Use the “ d ” or “ c ” button to select “ n ”
ERASE.
➁
Use the “ ab ” button to select “FRAME”, “ALL
FRAMES” or “FORMAT”.
➂
Press the “MENU/OK” button.
Formatting erases all of the data on the
SmartMedia.
● ! To cancel single frame erase, all-frame erase or
media formatting, press the “BACK” button.
● ! If “1” or “7” is displayed, reset the
respective settings.
1
If you press the “MENU/ OK” button, the menu
screen will appear on the LCD monitor.
● ! If the “2 ” message appears, wipe the
contact surfaces on the SmartMedia (the gold-
colored area) with a soft, dry cloth and then re-insert
it into the camera.
If this does not resolve the problem, format the card.
● ! If the “ ” message is displayed, format the card. ● ! Press the “BACK” button to exit the menu display.
● ➀
●
➁
● ➂
n ERASING SINGLE • ALLFRAMES/FORMATTING
PLAYBACK MENU
ERASING SINGLE-FRAME
Erases only the selected image.
●
! You cannot use this function to erase protected
images (
➡P.50, 52) or images with DPOF settings
( ➡P.56, 58).
ERASE ALL
Erases all the images.
● ! You cannot use this function to erase protected
images or images with DPOF settings.
FORMAT
Erases all the data and reformats (initializes) the
SmartMedia for use with this camera.
●
! Formatting also erases protected images and
images with DPOF settings.