FUJITSU FTP-627USL431 - Manual (Page 8)

8
FTP-627USL431/631
Command Contents
ESC W +X+X2++Y2+dX+dX2+dX+dY2 Page printing mode printing area setting.
ESC X+m+n Setting the turning time of the motor excitation.
ESC Y+01h+ESC+x+a+m+d~ Program download.
ESC Y+n1+n2 Relative position setting.
ESC a+n Positional alignment.
ESC c+1+n Sets internal processing.
ESC c+5+n Panel switch enable/disable setting.
ESC d+n Printing and n-line feeding.
ESC e+n n lines reverse feed.
ESC i Full cut
ESC m Partial cut
ECS s+n Sets printing speed.
ECS t+n Character code table selection.
ESC {+n Sets/resets upside down printing.
ESC DEL+n Flash memory delete
FS !+n Kanji printing mode collective specification.
FS & Kanji printing mode specification.
FS-+n Kanji underline specification/cancellation.
FS *+ m+n1+n2+d1 to dn High speed collective image printing specified.
FS . Kanji printing mode cancellation.
FS 2+c1+c2+d1 to dn External character definition.
FS 9+n Sets the detection functions.
FS C+n Kanji code system selection.
FS E+n Correction of impressed energy.
FS S+n+n1+n2 Kanji spacing setting.
FS W+n Kanji double height adn width printing specification/cancellation.
FS r+n* Parameter transmission.
FS-r+n Setting return parameter
GS!+n Setting character size
Commands continued