FUJITSU FTP-627USL431 - Manual (Page 3)

FTP-627USL431/631
 SPeCiFiCaTiONS
*+5˚C to +40˚C printing density assurance rance.
Item Specification
Part Number FTP-627USL431/435 FTP-627USL631/635
Interface Conforms to USB / Serial
Power
supply
For print head
24 VDC average current, 0.5A (0.9A peak)
(print ratio: 12.5%, print speed: 100mm/sec.)
For motor 24 VDC ±5%, 0.8 A maximum
For cutter 24 VDC ±5%, 1.1 A maximum
For logic 5 VDC ±5%, 0.2 A maximum
Dimensions Mechnism and board 101 x 114 x 139mm (WxDxH)
Weight Mechnism and board Approximately 600g
Life
Head
Pulse resistance: 100 million pulses/dot (under out standard
conditions); Abrasion resistance: paper traveling distance
50km (print ratio: 12.5% or less) 100km (print ratio: 12.5% or less)
Cutter 500,000 cuts (20 cuts/minute) 1,000,000 cuts
Platen 5,000 (open/close)
MTBF
Mechanism 3,000 hours
Circuit board 500, 000 hours
Operating
environment
Operating temperature* 0˚C to 50˚C
Operating humidity
20 to 85% RH (no condensation)
Storage temperature* -20˚C TO +60˚C (paper not included)
Storage humidity 5 to 90% RH (no condensation)
Detection
function
Head temperature
detection Detected by thermistor
Paper out /mark
detection Detected by photo-interuptor
Platen release Detected by sliding switch
Recommended thermal sensitive
paper
High Sensitive Paper TF50KS-E4 (Nippon paper)
Standard Paper TF60KS (Nippon paper),
FTP-020PU001 (58mm),
PD105R (Oji paper),
FTP-020P0701 (58mm)
Medium Life Paper TF60KS-F1, FTP-020P0102
(58mm), PD170R (Oji paper),
P220VBB-1 (Mitsubishi paper)
Long Life Paper PD160R-N (Oji paper), AFB-235
(Mitsubishi paper), TP50KJ-
R (Nippon paper), HA220AA
(Nippon paper)