Loading sra3 paper into tray 5 (bypass) – HP 3535 User Manual

Page 211

Text mode
Original mode

5 – 11

Xerox DocuColor 3535 Printer/Copier

Loading SRA3 Paper into Tray 5 (Bypass)

Open Tray 5 (Bypass) by grasping the tray and gently pushing it
away and down from the printer/copier.

Adjust the front edge paper guide to the closest position forward
beyond the 12 inch position.

Load the SRA3 paper into Tray 5 (Bypass). Load the paper with
the side to be printed on facing down.

Adjust the back edge guide until it lightly touches the paper.

NOTE:

You can select SRA3 paper as one of the default paper

sizes for Tray 5 (Bypass). Performance using this paper size may
vary. The maximum image area is 302 x 476.6mm with a
guaranteed area of 297 x 476.6mm.

CAUTION:

Do not place any objects or materials other than the

appropriate stock on Tray 5 (Bypass). Printer/copier damage may
occur.