How to pause or cancel a scanning job, Scanning in batches, How to pause or cancel a scanning job 3–25 – HP 3535 User Manual
Page 137: Scanning in batches 3–25
3– 25
Xerox DocuColor 3535 Printer/Copier
How to Pause or Cancel a Scanning Job
You can cancel a scan job during the scanning process or delete
scan jobs that are stored in the machine. In order to pause or
cancel a scan job the procedure below:
1
Press
Stop
to pause scanning. The machine will stop.
2
Press
Stop
to end scanning, or press
Start
to resume scanning.
Scanning in Batches
This section describes how to scan multiple originals as one scan
job if you have more originals to be scanned than can fit into the
DADF.
1
Begin scanning your first original, then select
Next Original
.
NOTE:
When using the DADF, wait until the machine has
completed scanning the first batch of originals before loading the
next batch.
NOTE:
If no action is carried out after the above screen has been
displayed, the machine will assume that there are no more
originals to be scanned and end the job.
2
Load the next original and then press
Start
.
3
Select
Last Original
after all originals have been scanned.