HP ACC2 Aurora - Manual (Page 6)

6
are correct, the camera should operate. If the current
time is within a start and stop time in the sequence file, the
sequence is executed.
The default is to use dynamic scaling of the data. The operator
can set the scaling to «fixed».
In the Image_1 window:
Display -> Scaling
¤ Fixed Min/Max 0 1500 (is useful settings.)
This settings do not affect the data saved to disk. The
datarange is 12 bit. The operator can move the cursor around in
the image. In the lower left corner of the Image_1 window is
displayed:
X .# Y .# I .#
I is the data value [0 - 4095].
The name of the data files are diplayed in the Aurora Camera
Control window:
e.g. 06:50:50 File name: C:\data\images\981215\06\98121506.33G
The extention 33 is a hex number (starts on 00 every hour) and
G indicates that this image is taken with a green filter (R
indicates red filter).