HP PHOTOSMART PLUS B209 - Manual (Page 8)

2 Finish setting up the
HP Photosmart
• Add the HP Photosmart to a network
• Set up a Bluetooth connection
Add the HP Photosmart to a network
• “WiFi Protected Setup (WPS)” on page 5
• “Wireless with a router (infrastructure network)” on page 6
• “Wireless without a router (ad hoc connection)” on page 7
WiFi Protected Setup (WPS)
To connect the HP Photosmart to a wireless network using WiFi Protected Setup (WPS),
you will need the following:
A wireless 802.11 network that includes a WPS-enabled wireless router or access
point.
A desktop computer or laptop with either wireless networking support, or a network
interface card (NIC). The computer must be connected to the wireless network that
you intend to install the HP Photosmart on.
To connect the HP Photosmart using WiFi Protected Setup (WPS)
1. Do one of the following:
Use Push Button (PBC) method
a. Select setup method.
On Home screen, touch right arrow to view more options.
Touch Setup.
Touch Network.
Touch WiFi Protected Setup.
Touch Push Button.
b. Set up wireless connection.
Touch Start.
Press corresponding button on WPS-enabled router or other networking
device.
c. Install software.
Finish setting up the HP Photosmart 5
Finish
sett
ing u
p
t
h
e HP Ph
oto
sma
rt