Honeywell VISTA-128BP - Manual (Page 34)

– 34 –
Bypassing Protection Zones (cont’d)
Quick Bypass
Your system allows you to easily bypass all open (faulted) zones without
having to enter zone numbers individually.
Note: All bypasses are removed when an OFF sequence (security code plus
OFF) is performed.
To use the Quick Bypass feature:
BYPASS
1. Enter your security code and press 6 then press # .
2. BYPASS 007 FRONT
UPSTAIRS BEDROOM
Typical bypass message
In a few moments, all open zones will be
displayed along with the word BYPASS. Wait
for these zones to be displayed before arming.
Arming the system before bypassed zones are
displayed eliminates all bypasses.
3. DISARMED BYPASS
READY TO ARM
Arm the system as usual when the keypad
displays the "ready" to arm message. Bypassed
zones are unprotected and will not cause an
alarm when violated while your system is
armed.
Displaying Bypassed Zones
For determining what zones have been previously bypassed. Bypassed zones
can be displayed only when system is disarmed.
BYPASS
1. Enter your security code and press 6 .
2. Wait for all bypassed zones to be sequentially displayed.