Husqvarna 232R - Manual (Page 3)

English –
3
Before using a new machine
• Read the Operator‘s Manual carefully.
• Check the assembly and adjustment of the cutting
equipment. See page 18-19.
• Start the machine and check the carburettor settings. See
page 22-24.
IMPORTANT! A too lean carburettor adjustment significantly
increases the risk of an engine breakdown.
Insufficient care of the air filter will cause deposits on the spark
plug resulting in starting difficulties.
CONTENTS
List of contents
SYMBOL EXPLANATION
Symbols ............................................................................... 2
CONTENTS
Before using a new machine ................................................. 3
List of contents .................................................................... 3
SAFETY INSTRUCTIONS
Personal protective equipment ............................................. 4
The machine‘s safety equipment .......................................... 4
Control, maintenance and service of the machine‘s safety
equipment ...................................................................... 6
Cutting equipment .............................................................. 8
General safety instructions ................................................... 9
General working instructions ............................................. 10
Basic clearing techniques .................................................... 11
WHAT IS WHAT?
What is what on the brush cutter? ...................................... 15
ASSEMBLY
Assembling the handlebars (225R/RD/ 232R/RD) ............ 16
Assembling the handlebars (235R) ..................................... 16
Assembling the J-handlebars (225RJ) ................................. 17
Transport position, handlebars and J-handlebars ................ 17
Assembly of the blade and trimmer head ............................ 18
Assembling the blade guard and grass blade ....................... 18
Assembling the blade guard and clearing blade ................... 18
Assembling the spray guard and trimmer head Superauto II
(225R/RD/ 232R/RD) ................................................ 19
Assembling the spray guard and trimmer head
Trimmy SII (235R) ...................................................... 19
Assembling other guards and cutting equipment ................ 19
Assembling and dismantling the two-part shaft
(225RD/ 232RD) ........................................................ 20
Adjusting the harness and clearing saw ............................... 20
FUEL HANDLING
Fuel mixture ...................................................................... 21
Fuelling .............................................................................. 21
START AND STOP
Control before starting ....................................................... 22
Start and stop ..................................................................... 22
MAINTENANCE
Carburettor ........................................................................ 23
Muffler .............................................................................. 25
Cooling system .................................................................. 25
Air filter ............................................................................. 26
Angle gear .......................................................................... 26
Two-part shaft .................................................................... 26
Spark plug .......................................................................... 26
Filing the grass blade .......................................................... 26
Sharpening the clearing blade ............................................ 27
Maintenance schedule ........................................................ 27
TECHNICAL DATA
225R/RD/RJ ..................................................................... 28
232R/RD ........................................................................... 28
235R .................................................................................. 28
FEDERAL AND CALIFORNIA EMISSION CONTROL
WARRANTY STATEMENT
Your warranty rights and obligations .................................. 31
Maintenance, replacement, or repair of the emission control
devices and systems may be performed by any nonroad
engine repair establishment or individual.
WARNING!
Under no circumstances may the design
of the machine be modified without the
permission of the manufacturer. Always
use genuine accessories. Non-authorised
modifications and/or accessories can
result in serious personal injury or the
death of the operator or others.
Your warranty does not cover damage or
liability caused by the use of non-
authorized accessories or replacement
parts.
!
These decals certify that the product has been approved in
accordance with American exhaust emission requirements EPA
1 and CARB 95.