Husqvarna 232R - Manual (Page 17)

English –
17
ASSEMBLY
Assembling the J-handlebars
(225RJ)
• The handlebars can easily
be turned to fit along the
shaft for easy
transportation and storage.
• Loosen the knob. Turn the
handles clockwise so that
the throttle comes against
the engine.
• Thereafter fold the
handlebars around the
shaft. Tighten the handle.
• Attach the transport
guard.
!
WARNING!
When fitting the J-handle only grass blade
or trimmer head may be used. Sawblades
must not be used.
• Unscrew the handle and
plastic cover from the
handlebar bracket.
• Place the handlebars with
the handlebar holder on
the handlebar bracket. Fit
the handle and plastic
cover on the handlebar
bracket by inserting the
handle in the hole. Do
not tighten too tight.
• Put on the harness and
hang the machine in the
suspension hook. Now
finely adjust so that the J-
handlebars give a
comfortable working
position when attached to
the harness. Tighten the
handle.
Transport position, handlebars and
J-handlebars