HP 3C509B-TP - Manual (Page 26)

3 Connecting to a Windows NT Server 3.51
Windows NT Workstation Version 3.51
19 Choose to install all applicable TCP/IP options and select “Continue.”
(If you do not have the required information, contact your network
administrator)
20 At the “Network Settings” dialog box, click on “OK.”
21 Accept the default “NWLink IPX/SPX Protocol Configuration” and hit enter.
22 At the “TCP/IP Configuration” screen, choose to use DHCP or enter your
TCP information and click on “OK.”
(If you do not have the required information, contact your network
administrator)
23 At the “Domain/Workgroup Settings” Dialog Box, click on “OK” to accept
the default “Workgroup” as your workgroup name.
(If you do not have the required information, contact your network
administrator)
24 To complete the installation, remove the floppy disk , and click on
“Restart Computer” button in the “Windows NT Workstation Networking
Setup” dialog box.