Humax CR-3510 - Manual (Page 28)

27
Find the services manually in the transponder you select.
This search mode included normal advanced and SMATV search.
Use the buttons to select an antenna number for the required
satellite. The satellite name will help you select antennas.
If you want to search in SMATV mode, then select the
Antenna Alternative 16.
Use the buttons to enter the Frequency of the transponder you
want to find (MHz). Or use the Number buttons(0~9) on the remote
control.
Use the buttons to select the Polarization of the transponder.
Horizontal : 18 V are output through LNB line
Vertical : 13.5 V are output through LNB line
Inputs the Symbol Rate of the transponder you want to find.
Use the buttons to select the Forward Error Correction of the
transponder. You can select the value of auto, 1/2, 2/3, 3/4, 5/6
and 7/8.
Select “Yes” and you can find more services using the home
network.
If you want to find free services, then select “Yes”.
The scrambled services will not be automatically stored.
Manual Search
Antenna Alternative
Frequency
Polarization
Symbol Rate
FEC (Forward Error Correction)
Network Search
Automatic Skip
Guide of Main Menu