Humax CR-3510 - Manual (Page 10)

1. Connect a parabola antenna cable to the LNB IN jack.
Connect an AIR or Cable Box Antenna out terminal to the RF IN jack.
2. Connect between the RF OUT jack on the STB and the ANT INPUT
(RF INPUT) jack on the TV.
3. Connect a set of audio, video cables between the AUDIO, VIDEO OUT jacks on the STB
and the AUDIO, VIDEO INPUT jacks on the TV.
4. Turn on your STB and TV.
5. Switch to the Video mode using the TV remote control.
6. Operate the STB to watch a program you want.
An S-Video Cable produces better picture quality than a Video Cable.
7. Switch to the STB Standby mode.
8. Switch to the TV Air mode using the TV remote control and then select a TV channel
you want to watch.
9. Connect a set of audio cables between the AUDIO OUT jacks on the STB
and the AUDIO (LINE, AUX) INPUT jacks on the HI-FI SYSTEM.
Connecting the Set-Top Box to Your TV (using a RCA CABLE)
TV Rear Panel
From Cable/ Antenna Source
Viewing the STB programs
Viewing the Free-to-Air or CABLE programs
Using a HI-FI SYSTEM for sound
Connecting the Set-Top Box
9