Humax CR-3510 - Manual (Page 14)

13
The details of Service Part and Event Part are automatically
displayed on the I-Plate when pressing the( )button or changing
services. I-Plate is divided into Service Part and Event Part.
Service Part consists of the following item :
• I-Plate icon, Current Time
• Service Name, Service Number, icon
• Subtitle, Teletext, Scrambling Service Symbol
(These are automatically displayed when the broadcasting
station provides appropriate information.)
• Signal Quality Bar
EVENT PART consists of the following items:
• Event name, Event duration time
• Description of event, State of reserved event
Event Part shows the current and next event information.
button : Use to move from the current event information to the
next event information.
button : Use to move from the next event information to the
current event information.
When the Help( )button is pressed under I-Plate display,
the help window will appear on the screen.
The Help window shows the extended current event information,
including: Satellite Name, Frequency, Polarization, Symbol Rate, FEC...
The detailed information for the event can be displayed by pressing the
Help( )button in the I-Plate with event data displaying mode.
You can reserve the program in the event data display mode by using
the Time( )button.
When the current data is displaying on the screen, you can reset timer
program Once, Daily or Weekly mode.
When you release the timer program mode, then you will be asked to
confirm the action.
To adjust the volume level, use the buttons or buttons.
To temporarily stop the volume, press the Mute( )button.
To cancel Mute, press the Mute( )button again or press the
buttons or buttons.
Information Box (I-Plate)
Volume Control
SERVICE-PART (Left side of the box)
EVENT-PART (Right side of the box)
Guide of Functions