Humax CR-3510 - Manual (Page 15)

14
To change services, do in the following sequence:
1. Press the Number buttons(0~9) on the remote control.
2. Press the buttons or buttons.
Or press the Recall( ), Service-List( ), EPG( )button.
To switch between TV and Radio services, press the TV/Radio
( )button.
To select the previous viewed service, press the Recall( )button.
When you want to watch the Audio Language of soundtrack under
servicing, press the Soundtrack( )button firstly.
The on-screen menu is displayed on the top to left side of the screen.
To change the audio language:
1. buttons : Use to select the Audio on the left, right or both.
2.
buttons : Use to select the audio language you want.
3. , button : When this button is pressed, the menu
screen will disappear keeping the selected audio
soundtrack constant.
When the current service is switched, the audio language returns to
the audio language that was selected in previoius service. If the
returned audio language is invalid, the audio language that you
selected from the audio language menu has the priority of playback.
Use your TV remote control unit to control the Teletext service.
The teletext button doesn’t exist on the STB remote control unit.
When the service supports Teletext, the Teletext icon( ) is displayed
on the i-plate.
Changing Services
Soundtrack
Teletext