Hitachi CMP4202 - Manual (Page 32)

Recommended Signal List (continued)
• The type of video board or connecting cable used may not allow for correct displays adjustment of H.POSITION, V.POSITION, CLOCK and
PHASE.
• The monitor may fail to display an animation image correctly when a signal having a vertical frequency of 85Hz or higher is input to it.
• The monitor differentiates the signal modes according to the horizontal and vertical frequencies and the horizontal and vertical sync signal
polarities. Note that different signals having all these elements alike may be handled as the same signal.
• Displaying images with more than 512 lines of vertical resolution at Full diplay (compressed display) can result in the interpolation of stripes.
No.
Signal mode
Horizontal
frequency (kHz)
Dot clock
frequency (MHz)
Remarks
Signal Name Resolution
Vertical frequency
(Hz)
1
NTSC
NTSC-4.43
M-PAL
PAL60
525 59.94 15.73
2
PAL
N-PAL
SECAM
625 50.00 15.63
With Composite/S-video Input(VIDEO1 input).
This function can only be used when the optional video unit has been inserted.
No.
Signal mode
Horizontal
frequency (kHz)
Dot clock
frequency (MHz)
Remarks
Signal Name Resolution
Vertical frequency
(Hz)
1 480/60i 480 59.94 15.73
2 576/50i 576 50.00 15.63
3 576/50p 576 50.00 31.26
4 480/60p 480 59.94 31.47
5 720/60p 720 59.94 44.96
6 1080/50i 1080 50.00 28.13
7 1080/60i 1080 60.00 33.75
8 1035/60i 1035 60.00 33.75
With component input (VIDEO2 input)
This function can only be used when the optional video unit has been inserted.
PRODUCT SPECIFICATIONS (continued)
No.
Signal mode
Horizontal
frequency (kHz)
Dot clock
frequency (MHz)
Remarks
Signal Name Resolution
Vertical frequency
(Hz)
1 SCART
NTSC
PAL
59.94
50.00 15.734
15.625
With R, G, B Video input (VIDEO1 and VIDEO2 input).
This function can only be used when the optional video unit has been inserted.