Hitachi CMP4202 - Manual (Page 24)

OTHER FEATURES
Automatic Store
Approximately 1 sec. after adjustment is completed, the adjustments will be recorded as shown in the table below.
• The previously recorded items will be lost.
• The signal mode can be identified by the horizontal/vertical sync frequency and the sync signal polarity. Different signals with which all the
elements are the same or similar will be handled as the same signal.
Signal Check
Status Display Action
When AUTO DISPLAY is set to
ON, the input signal is switched or
when the RECALL button is
pressed. A guide is displayed for the input
terminal and the horizontal and
vertical sync frequency.
When the sync signal is no longer
detected. • A guide displays NO SYNC
SIGNAL, and POWER SAVE (for
approx. 5 sec.)
• When the condition continues
where the sync signal cannot be
detected, indicator lamp of
power source changes in
orange and the mode switches
to power save mode.
Recheck the personal computer
power switch status and the
connection status.
When the input signal does not
match the monitor specifications
or is in an unstable status. A guide displays OUT OF
FREQUENCY. Recheck the input signal
specifications.
RGB1
[RGB]
H : 46.5kHz V : 60Hz
POWER SAVE
OUT OF FREQUENCY
VIDEO
This function can only be used when the optional
video unit has been inserted.
VIDEO2
[COMPONENT]
Changes in the signal status are displayed on the screen as they arise.
Menu Display Registration condition
PICTURE
SOUND
DISPLAY
FUNCTION
OTHER
OPERATE MODE
VIDEO LEVEL
VOLUME
BALANCE
TREBLE
BASS
MUTE LEVEL
SIDE AREA
RGB1 SIGNAL
RGB2 SIGNAL
AUTO DISPLAY
LANGUAGE
ID NO.
ORBITER
MOVING TIMER
INVERSE
WHITE
Can register 1 group.
PICTURE
DISPLAY
CONTRAST
BRIGHTNESS
COLOR
TINT
GAMMA
COLOR TEMP.
DISPLAY SIZE
Can register for every input
function.
Menu Display Registration condition
Can register for every input
function in a video signal input.
DISPLAY V.POSITION
H.POSITION
CLOCK
PHASE
Can register 1 group every signal
mode.
PICTURE
DISPLAY
FUNCTION
ENHANCER
FILTER
MODE
WIDE MODE
RGB1 SIGNAL
RGB2 SIGNAL
Can register settings every RGB1,
RGB2 input (RGB mode).
PICTURE R-GAIN
G-GAIN
B-GAIN Can register settings every RGB
functions and video functions.
3D COMB
CONTRAST MODE
FILM MODE
PICTURE SHARPNESS
VIDEO PICTURE
BLACK STRETCH
LTI
CTI
YNR
CNR
COMPONENT1
COMPONENT2
COMPONENT1
COMPONENT2
COMPONENT
(VIDEO2)
COLOR SYSTEM
: When the optional video unit has been inserted.