Hitachi CMP4202 - Manual (Page 23)

ENGLISH
OTHER MENU
MAIN MENU
PICTURE
SOUND
DISPLAY
FUNCTION
OTHER
SEL. ENT ENT. RTN END
OTHER MENU
AUTO DISPLAY : ON
OFF TIMER : OFF
LANGUAGE : ENGLISH
ID NO. : 1
ORBITER : OFF
MOVING TIMER : 10MINITE
INVERSE : OFF
WHITE : OFF
SEL. ADJ. RTN BACK ENTER
MENU
Selected characters Setup hint
AUTO DISPLAY
Set to ON.
Information is displayed
when switching inputs and
changing signals. Set to OFF.
Information is not displayed
when switching inputs and
changing signals.
Set to OFF when the display is not needed when switching signals.
OFF TIMER
OFF 30MIN 60MIN
120MIN 90MIN
This function automatically sets the power to standby status when
the indicated time period has elapsed.
LANGUAGE
ENGLISH DEUTSCH ITALIANO
ESPANOL FRANCAIS
ENGLISH is the factory setting.
ID NO.
1 2 3 4
7 6 5
Assigns ID nos. to the monitors so that they can be controlled
individually (up to 7 monitors can be controlled).
ORBITER OFF ON
Automatically moves the images to prevent image retention. The
moving interval is set with the MOVING TIMER (1 - 60 min.).
MOVING TIMER Shortens the time interval. Extends the time interval.
INVERSE
OFF ON 60MIN
Normally, set to the OFF mode. When 60 min. is set, the power will
be set to standby status after 60 minutes have elapsed and the
setting will be canceled. When a still image is displayed for an
extended time, ON is then set and the same still image is again
displayed, panel image retention is prevented with [INVERSE] ON or
[WHITE] ON. Does not operate when there is no input signal.
WHITE
OPERATING INSTRUCTIONS (continued)