Hitachi CMP4202 - Manual (Page 21)

ENGLISH
DISPLAY MENU (continued)
Display area selection diagram (RGB input)
Resolution Full display Circular display
Display FULL NORMAL REAL ZOOM1 ZOOM2 ZOOM3
640 X 480
(VGA)
800 X 600
(SVGA)
1024 X 768
(XGA)
1280 X 1024
(SXGA)
1600 X 1200
(UXGA)
Processes such as compression (thinning) and expansion are performed for the above signal display. Because of this, there is a possibility that
flicker may become noticeable on ZOOM (1 ~ 3) depending on the display contents. If this occurs, turning the FILTER ON can reduce the
flicker.
Display size selection diagram
(This function can only be used when the optional video unit has been inserted.)
When you want to
Set the display
size to
Input signal Display screen Remarks
Play a 4:3 image in a 16:9 screen
faithfully.
4 3 Blanking occurs on both sides.
Play a 4:3 image in a 16:9 screen with
the height and width of the middle of
the screen enlarged on equal scales
and with both sides appearing
somewhat enlarged.
PANORAMA
(Panoramic)
The 16:9 VISTA size image in the 4:3
image is faithfully reproduced on the
16:9 screen.
MOVIE1
• The 4:3 image is called a letterbox
image.
• In some cases, some slight blanking may
remain at the top and bottom.
The 21:9 Cinema size image in the 4:3
image is expanded vertically on the
16:9 screen.
MOVIE2
In some cases, some slight blanking may
remain at the top and bottom.
Play a 4:3 image faithfully in a 16:9
screen in the standard vertical size and
horizontally squeezed.*
FULL
* An image with an aspect ratio of 16:9
shrunk horizontally to 4:3 to display in a
4:3 screen
OPERATING INSTRUCTIONS (continued)
TIPS
• Composite / S signal (video1 input) and component (576i, 480i, 480p) signal applicable for all size modes.
• For component (HD3: 1035i, 1080i, 720p) signals, the display mode is not selectable.
(4:3 signal)
(Vista)
(Cinema)
(Squeez)
* VGA and W-VGA
only