beautypg.com

Function power swivel, Caution – Hitachi 32LD8800TA User Manual

Page 39

background image

36

ENGLISH

FUNCTION

Power Swivel

With the Desktop stand (included for 32LD8800TA, optional for 37LD8800TA), you can adjust the angle of the

monitor side to side by pressing

SWIVEL

button on the remote control.

1. Press

SWIVEL

button on the remote control.

The Swivel Display (as shown in the fi gure on the right) will appear on the
screen.

2. Adjust the angle of the monitor with ◄ ►keys while Swivel Display is on

the screen.
The monitor will be able to move ±30 degrees to each side.

NOTE

If the stand cable is not connected to the unit, the message “Not Available”

will appear on the screen.

The Swivel Display will automatically disappear when no operation has

been made for about 6 seconds.

The Swivel Display

Swivel

CAUTION

Do not push the panel with your hands while operating the Swivel. It could damage the panel and/or stand.
Do not allow children to play or hang on the TV. These actions may tip it over, causing personal injury.
Do not swing the monitor back and forth.
Do not place any fragile objects around the monitor. The monitor would hit the object(s) during the Swivel

operation and could cause the breakage of the objects and/or the stand.

To operate the Swivel function correctly, place the monitor on the stable surface.
When you use the unit as wall-mounting, disconnect the stand cable from the monitor before installation.

SWIVEL
button

Information

About Swivel terminal connection

CAUTION

When you install the Desktop stand, follow the Instructions of the Manual included with the stand.
Turn Off the Main Power of the monitor when connecting or disconnecting the stand cable to the unit.

To disconnect the stand from the unit.

Before detach the stand from the unit, make sure to

disconnect the stand cable
from the Swivel terminal on
the rear side of the unit.

POWE

R SWIV

EL

CAUTION

When you use the Power Swivel function, make sure that the Power Cord, cord

or chain connected to the wall is loose enough to operate the Swivel function
securely.

Do not put hands or faces near the monitor while operating the Swivel. It could

cause personal injury. Beware especially when small children are around the
monitor.

To connect the Desktop stand to the unit

Connect the designated stand cable to the Swivel

terminal on the rear side of
the unit.

POWER SWIVEL

30°
30°

Slack