Code 93 message length, Code 93, Code 93 code page – Hand Held Products 2D IMAGER 4800P User Manual

Page 66

6 - 12

4800p 2D Imager User’s Guide

Code 93

< Default All Code 93 Settings >

Code 93

Code 93 Message Length

Scan the bar codes below to change the message length. Refer to

Message

Length Description

(page 6-2) for additional information. Minimum and

Maximum lengths = 0-80. Minimum Default = 0, Maximum Default = 80.

Code 93 Code Page

Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the bar
code being scanned was created using a code page that is different from the one
the host program is expecting. If this is the case, scan the bar code below, select
the code page with which the bar codes were created (see

Code Page Mapping

of Printed Bar Codes

on page A-6), and scan the value and the Save bar code

from the

Programming Chart

on the inside the back cover of this manual. The

data characters should then appear properly.

* On

Off

Minimum Message Length

Maximum Message Length

Code 93 Code Page