User specified intercharacter delay, Interfunction delay – Hand Held Products 2D IMAGER 4800P User Manual
Page 46
4 - 6
User Specified Intercharacter Delay
An intercharacter delay of up to 495 milliseconds (in 5 ms steps) may be placed
after the transmission of a particular character of scanned data. Scan the
Delay
Length bar code below, then scan the number of 5 millisecond steps (0-99), and
the
Save bar code using the
inside the back cover of this
manual.
Next, scan the
Character to Trigger Delay bar code, then the 2-digit hex value
for the ASCII character that will trigger the delay
To remove this delay, scan the
Delay Length bar code, and set the number of
steps to 0. Scan the
Save bar code using the
cover of this manual.
Interfunction Delay
An interfunction delay of up to 495 milliseconds (in 5 ms steps) may be placed
between the transmission of each segment of the message string. Scan the
Interfunction Delay bar code below, then scan the number of 5 millisecond
steps (0-99), and the
Save bar code using the
inside the
back cover of this manual.
To remove this delay, scan the
Interfunction Delay bar code, then set the
number of steps to 0. Scan the
Save bar code using the
inside the back cover of this manual.
Delay Length
Character to Trigger Delay
Interfunction Delays
Prefix
Scanned Data
Suffix
1
2 3 4 5
STX
HT
CR
LF
Interfunction Delay