Hand Held Products 2D IMAGER 4800P - Manual (Page 135)

4800p 2D Imager User’s Guide 10 - 3
Test Menu
When you scan the Test Menu On code, then scan a programming code in this
manual, the imager displays the content of a programming code. The
programming function will still occur, but in addition, the content of that
programming code is output to the terminal.
Note: This feature should not be used during normal imager operation.
2D PQA (Print Quality Assessment)
Two-dimensional Print Quality Assessment (2D PQA) is a feature of Hand Held
Products image readers where the data from the successful read of a 2D bar
code symbol is augmented with lines of text that both identify the symbol, and
also report graded measurement parameters obtained from it.
2D PQA Reporting
Hand Held Products 2D PQA reporting can be enabled in two different modes:
Full Report or Screening. (To see displayed results, Microsoft® Notepad or a
word processor/editing program is recommended.)
If you are using Visual Xpress, you can enable Full Report, a listing of all of a
symbol's identifying information, measurements, and corresponding grades, by
typing the following menu command:
2D_PQA1
or by scanning the following bar code:
On
* Off
Full Report