Hand Held Products 2D IMAGER 4800P - Manual (Page 19)

4800p 2D Imager User’s Guide 1 - 5
USB COM Port Emulation
Scan the following code to program the imager to emulate a regular RS-232-
based COM port. If you are using a Microsoft® Windows® PC, you will need to
download a driver from the Hand Held Products website (
www.handheld.com ) .
The driver will use the next available COM port number. Apple® Macintosh
computers recognize the imager as a USB CDC class device and automatically
use a class driver. Scanning the code below changes the terminal ID to 130.
Note: No extra configuration (e.g., baud rate) is necessary.
CTS/RTS Emulation
ACK/NAK Mode
Reading Techniques
The 4800p scans bar codes and also captures images. It can be used with or
without a stand.
USB COM Port Emulation
On
* Off
On
* Off