Yamaha RM-CR Remote Conference Processor with Dante - Manual (Page 11)

Eng
lish
11
RM-CR Installation Manual
4 [MIC IN] 1/2 jacks
These are XLR jacks (balanced) for connecting dynamic mics. Do not connect
condenser mics here.
5 [RESET] button
Use a fine-pointed object such as an eject pin to press this button.
Long-pressing this button for less than 4 seconds or for 12 seconds or more does not
reset anything.
6 [SETUP] port
This port is for connection to a computer so that settings can be made via a web
browser. Use the included USB cable (A-micro B type) for this connection. For details
on settings, refer to “RM-CR Reference Manual.”
Long press Status indicator Reset target
4 seconds to less than 8
seconds
Flashes twice per
second
Network-related settings
8 seconds to less than
12 seconds
Flashes three times
per second
All settings
(automatically restarts after initialization)